The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

dB Technologies IG1T INGENIA 2-Way Active Speakers (2 x 6.5")

MSRP: $1,500.00
$1,199.00
(You save $301.00 )
(No reviews yet) Write a Review
SKU:
IG1T
The INGENIA IG1 T is equipped with 2 premium low frequency transducers and 1 1"compression driver. 
 
All models of the series are designed to work individually, but they can also be coupled by simply turning one speaker upside down and placing it upon the other one.
 
Thanks to infrared technology, INGENIA detects the presence of a second speaker, and an onboard-configuration wizard automatically sets up the system in order to ensure the best coverage and acoustic coherence. 
 
INGENIA’s horn design is horizontally symmetric and vertically asymmetric: this way, horizontal dispersion is wide and constant while vertical dispersion is narrow in the upper part and wider in the lower part. Thanks to such feature, when 2 Ingenias are coupled high frequencies add up avoiding any interferences. In addition to that, a sophisticated digital steering function process each way of the speaker in order to adjust the dispersion without moving the box. As a result, the whole audience enjoys a perfect intelligibility.
 
Users can easily control the system through an intuitive OLED display. In fact, behind the simple interface runs a cutting-edge processing which manages mix, coverage steering, EQs  levels and imput devices.
 
.INGENIA can be easily and safely coupled through a  LP-IG accessory  which fits all the 4 INGENIA models. Moreover, feet and recessions on the top and the bottom of the enclosure ensure the speakers to be perfectly aligned, avoiding any incorrect setup operation.
 
Ingenia DRK-IG flybar adapts to all the speakers of the series allowing to fly coupled speakers in a vertical array. 
  • WORK AS STAND-ALONE SYSTEM OR IN COUPLE
  • CEC HORN TECHNOLOGY (ASYMMETRICAL VERTICAL COVERAGE)
  • DIGITAL STEERING COVERAGE
  • ELEMENT POSITION DETECTION (IR PORT)
  • SPEAKERS WITH NEODYMIUM MAGNETS
  • OLED DSP INTERFACE
  • UNIQUE SPEAKER LOCK SYSTEM
    Technical Data
    Speaker Type 
    2-Way Active Speaker
    Acoustical data
    Frequency Response [-10dB]
    85 - 20.000 Hz
    Frequency Response [-6dB]
    92 - 19.200 Hz
    Max SPL
    128 dB
    HF
    1"
    HF Voice Coil
    1.4"
    Directivity (HxV)
    100 x 80° (+15°/- 65°)
    HF Type
    Neodymium compression driver
    Horn
    Vertical asymmetric
    Crossover Frequency
    2100 Hz
    LF
    2x6.5”
    LF Voice Coil
    1.5"
    LF Type
    Neodymium
    Amplifier
    Amp Technology
    Digipro® G3
    Amp Class
    Class-D
    Peak Power
    800 W
    RMS Power
    400 W
    User Interface
    OLED display + rotative knob w/switch
    Self-rotating display
    Yes
    Positioning
    EPD (Element Position Detection)
    Display Mirroring
    Yes
    Processor
    Controller
    DSP 56 bit
    AD/DA Converter
    24bit/48kHz
    System Presets
    Factory presets + User defined
    Limiter
    Dual Active Peak, RMS, Thermal
    Input
    Signal Input
    1 x Combo IN (XLR + Jack 6.3mm)
    Signal Out
    1 x XLR link OUT
    USB connector
    Yes - mini USB
    Mechanics
    Housing
    Polypropylene PP reinforced
    Grille
    FULL /Invisible screws
    Flyable
    Yes
    Handles
    1x on top / 1x on bottom
    Pole Mount
    Yes
    Width
    195 mm (7.68 in)
    Height
    536 mm (21.10 in)
    Depth
    271 mm (10.67 in)
    Weight
    10.6Kg (23.37 lbs.)
    Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

Videos Hide Videos Show Videos